EXT Arma MX Rear Shock - Surron/Talaria

The Arma MX is a direct bolt-on replacement for the Sur Ron Light Bee X and Talaria Sting. No additional Hardware is needed, simply bolt-on and go. Shock will be pre-tuned by EXT-USA on the information you provide.   

Engineered with performance and control as primary objectives, the shock structure has seen a redesign in order to be more robust. The Hydraulic Bottom-Out Circuit (HBC) has been enhanced with a wider range of adjustments, to prevent bottom-out issues, while allowing riders to use softer spring rates and providing excellent support and end stoke characteristics.

Arma MX Features:

• 4 way adjustable: LSC-HSC-LSR-HBC (Hydraulic Bottom-Out Control)
• High flow 29 mm main piston
• 24 mm valve piston
• 14 mm shaft (50% larger than most other coils on the market to help deal with large side loading events)
• Engineered rebound circuit to separate bump and rebound oil flow – ultra-low-friction coating
• User adjustable HBC technology
• Very low reservoir pressure for maximum sensitivity  and low cavitation(55 PSI)
• Full custom hydraulic setup that is bike and rider specific for each shock
• Very low hysteresis for high dynamic response
• High turbulent flow for progressive dampening and mid stroke support
• Low friction seal
• Thinner bottom-out bumper and debris clearing washer
• New low profile rebound knob for easy spring swap
• Included with 1 lightweight spring available in 400lb, 450lb, 500lb, 550lb or 600lbs (Lower options may be available upon request)
• Comes with Surron-specific mounting hardware for easy bolt-in installation. 
• Full length and travel 10.5×3.5″ shock (do not use with a 1.5″ riser linkage)

Note: This table is a general guide. For firmer or softer preference select a spring weight above or below.

Warning: Please refer to the Sur Ron guidance regarding maximum weight limit for the bike.